Electric Industrial Production

Print Version

For applications where the use of compressed air is not practical, Ingersoll Rand offers a complete line of electric Impact Tools in 3⁄8, 1⁄ 2, 3 ⁄4 and 1-inch drive sizes. All models are ranked according to the Super Duty/Heavy Duty/Standard Duty ratings, and incorporate the same high quality of design and construction that has made Ingersoll Rand the world leader in Impact Tools.   Pressure-Feed Lubrication System Ingersoll Rand uses a “pressure-feed” lubrication system on all Twin-Hammer and Jumbo Hammer Impact Mechanisms. This exclusive system allows the operator to externally inject grease into a chamber through a grease fitting in the rear of the motor housing. Air pressure from the motor force feeds the right amount of grease from the chamber and through the rotor, distributing a film of protective grease on the hammer mechanism. This system insures the continuous lubrication of critical hammer parts, resulting in longer, trouble free life. Use Cat. No. R000A2-228 Metal Grease Gun and Cat. No. 100 Grease, or equivalent. This grease has the right viscosity to flow through the small orifice in the rotor and anvil.   Power Regulator System Some Twin-Hammer and Jumbo Hammer tools are equipped with a combination power regulator/reverse valve. This design allows operators to adjust power output, to prevent overtorquing on delicate work, in one direction—while maintaining full power in the opposite direction. The power output in either direction is designated by the numbers “0” thru “5”. Number 5 designates maximum power.

8005 Electric Impact The 8005 electric impact wrench delivers 2200 impacts per minute, the most of all our electric impacts. High quality, heat treated steel gears and lightweight cast aluminum housing and handle combine to make a long lasting, user friendly wrench.	8049 Electric Impact A step up from the 8005, the 8049 model impact wrench produces more torque than its predecessor while sharing the same lightweight cast aluminum housing and handle, designed to reduce operator fatigue.	8053 Electric Impact The third installment in IRs electric Impactools line. At max power, the 8053 produces 330 ft.lb. of torque 1900 times per minute.
8055 Electric Impact The 8055 features a 3/4” square drive and pistol grip and is great for jobs requiring a consistent 100-375 ft.-lb. of torque.	8056 Electric Impact The largest electric impact wrench IR offers. The 8056 has a 1” square driver and allows full power in reverse for removing bolts, nuts, studs, and lag screws.	8062 Electric Impact Complete with its pistol-grip style handle and its 5/8” hex Quick Change driver, the 8062 delivers high torque for maximum efficiency.